How to Replace the Pull Cord on a Lawn Mower: Step-by-Step Guide
Is your lawn mower pull cord broken? Don’t worry. You can fix it yourself. This guide will show you how. Follow these steps to replace the pull cord on your lawn mower.
Why Replace the Pull Cord?
The pull cord is important. It helps start the lawn mower. If it breaks, the lawn mower won’t start. Replacing it is a simple fix. You can do it yourself at home.
Tools and Materials You Need
Before you start, gather these tools:
- New pull cord
- Screwdriver
- Pliers
- Wrench
- Scissors
- Gloves
With these tools ready, you can begin the repair.
Step 1: Remove the Lawn Mower Cover
First, disconnect the spark plug wire. This will keep you safe. Next, use the screwdriver to remove the screws on the lawn mower cover. Carefully lift the cover off. Set it aside.
Step 2: Remove the Old Pull Cord
Find the recoil starter. It’s where the pull cord is. Use the pliers to remove the old cord. Be careful. The spring inside can be tricky.
Step 3: Measure and Cut the New Cord
Take the new pull cord. Measure it against the old one. Cut it to the same length. Use the scissors to make a clean cut.
Credit: www.youtube.com
Step 4: Attach the New Cord
Thread the new cord through the recoil starter. Tie a knot at the end. Make sure the knot is tight. This will keep the cord secure.
Credit: www.familyhandyman.com
Step 5: Wind the Recoil Spring
Next, wind the recoil spring. This part can be tricky. Turn it slowly. Make sure the spring is tight. The cord should wind up smoothly.
Step 6: Reattach the Lawn Mower Cover
Once the new cord is in place, reattach the cover. Use the screwdriver to secure the screws. Make sure the cover is tight.
Step 7: Test the New Pull Cord
Finally, reconnect the spark plug wire. Pull the new cord. The lawn mower should start. If it doesn’t, check your work. Make sure everything is secure.
Tips for Success
- Wear gloves to protect your hands.
- Take your time. Don’t rush.
- Make sure the cord is the right length.
- Double-check your work.
Replacing the pull cord is a simple task. You can do it with basic tools. Follow these steps to get your lawn mower working again.
Frequently Asked Questions
What Tools Do I Need To Replace A Lawn Mower Pull Cord?
You will need a screwdriver, pliers, and a new pull cord.
How Do I Remove The Old Pull Cord?
First, remove the starter cover. Then, unwind and take out the old cord.
How Long Should The New Pull Cord Be?
The new pull cord should be about the same length as the old one.
How Do I Attach The New Pull Cord?
Thread the new cord through the starter cover. Then, knot it securely to the handle.
Why Does My Lawn Mower Pull Cord Keep Breaking?
The cord may break due to wear, sharp edges, or improper use.
Can I Replace The Pull Cord Without Professional Help?
Yes, replacing the pull cord is a simple DIY task for most people.
Conclusion
Now you know how to replace the pull cord on a lawn mower. It’s a simple fix that you can do yourself. With a little patience and the right tools, your lawn mower will be running in no time.