How to Install a Pull Cord on a Lawn Mower: Step-by-Step Guide
Lawn mowers need a pull cord to start. Sometimes, the pull cord breaks. When it does, you need to fix it.
This guide will show you how. Follow the steps below to install a new pull cord.
Credit: www.familyhandyman.com
Tools You Will Need
- Screwdriver
- Pliers
- New pull cord
- Wrench
- Scissors
Step-by-Step Instructions
Step 1: Remove The Engine Cover
First, find the screws on the engine cover. Use the screwdriver to remove them. Then, take off the cover.
Step 2: Take Out The Old Pull Cord
Look for the pull cord housing. It’s usually near the top. Use the pliers to pull out the old cord. If it is stuck, cut it with scissors.
Step 3: Measure And Cut The New Pull Cord
Take the new pull cord and measure it. It should be the same length as the old one. Cut it with scissors.
Step 4: Attach The New Pull Cord
Find the hole where the old cord was. Thread the new cord through this hole. Tie a knot at the end.
Step 5: Wind The Cord
Use the wrench to turn the pulley. This will wind the cord around it. Keep turning until the cord is tight.
Step 6: Reattach The Engine Cover
Place the engine cover back on. Use the screwdriver to put the screws back in. Make sure they are tight.
Tips for Success
- Wear gloves to protect your hands.
- Work in a well-lit area.
- Keep all the screws in one place so you don’t lose them.
- Check the new pull cord for any damage before installing.
Why This Is Important
A working pull cord is key. It helps start your lawn mower. Without it, you can’t mow your lawn.
Fixing the pull cord yourself saves money. You don’t need to hire someone. It’s also faster.
Credit: www.youtube.com
Frequently Asked Questions
How Do You Replace A Pull Cord On A Lawn Mower?
Remove the cover, old cord, then install a new one. Reassemble.
What Tools Do I Need To Install A Lawn Mower Pull Cord?
You need a screwdriver, pliers, and a new pull cord.
How Long Does It Take To Replace A Lawn Mower Pull Cord?
It usually takes about 30 minutes.
Can I Install A Pull Cord Without Professional Help?
Yes, you can. It’s a simple DIY task.
Why Does My Lawn Mower Pull Cord Break?
Wear and tear. Over time, it weakens and breaks.
Where Can I Buy A Replacement Pull Cord?
Hardware stores or online retailers like Amazon.
Conclusion
Now you know how to install a pull cord on a lawn mower. Follow the steps, use the right tools, and take your time. Your lawn mower will be working again soon. Happy mowing!
