How to Repair Pull Cord on Lawn Mower: Easy DIY Guide
The pull cord on a lawn mower can break. When this happens, you cannot start your mower. But do not worry. Fixing it is easy.
Follow these steps to repair the pull cord on your lawn mower.
Tools You Will Need
- Screwdriver
- Wrench
- Replacement pull cord
- Needle-nose pliers
- Work gloves
Steps to Repair the Pull Cord
Step 1: Remove The Lawn Mower Housing
First, make sure the lawn mower is off. Let it cool down if it was running. Put on your work gloves. Use the screwdriver to remove the screws on the housing. Lift the housing off the mower.
Step 2: Locate The Pull Cord Assembly
Find the pull cord assembly. It is usually on the side or top of the engine. Use the wrench to remove the bolts holding the assembly.
Step 3: Remove The Old Cord
Pull out the old cord. You may need needle-nose pliers to get a good grip. Be careful not to hurt yourself. Dispose of the old cord properly.
Step 4: Install The New Cord
Take the replacement cord. Thread it through the holes in the assembly. Tie a knot at the end of the cord. Make sure the knot is tight. Use the pliers if needed.
Step 5: Reassemble The Pull Cord Assembly
Place the pull cord assembly back on the engine. Use the wrench to tighten the bolts. Make sure the assembly is secure.
Step 6: Reattach The Housing
Put the housing back on the mower. Use the screwdriver to replace the screws. Make sure the housing is tight.
Step 7: Test The New Pull Cord
Pull the cord gently. It should move smoothly. Start the mower to make sure the cord works well.
Credit: www.youtube.com
Tips for Maintaining Your Pull Cord
- Keep the cord clean and dry.
- Check the cord for wear and tear.
- Replace the cord if it looks worn.
- Store the mower in a dry place.
Credit: www.familyhandyman.com
Frequently Asked Questions
How Do You Fix A Broken Lawn Mower Pull Cord?
First, remove the starter assembly. Replace the broken cord. Reassemble and test.
What Tools Are Needed To Repair A Pull Cord?
You will need a screwdriver, pliers, and a replacement cord.
How Much Does It Cost To Replace A Pull Cord?
A new pull cord costs around $10 to $20.
Why Does A Lawn Mower Pull Cord Break?
Pull cords break due to wear, tear, or improper use.
Can I Replace A Lawn Mower Pull Cord Myself?
Yes, it is a simple job. Basic tools and instructions help.
How Long Does It Take To Fix A Pull Cord?
It usually takes 30 minutes to an hour.
Conclusion
Now you know how to repair the pull cord on your lawn mower. It is simple and easy. Follow these steps and your mower will be ready to use again. Happy mowing!