How to Replace the Lawn Mower Pull Cord: Easy DIY Guide
Is your lawn mower pull cord broken? Don’t worry. You can fix it yourself. This guide will show you how. It’s easy. Let’s get started.
Tools You Will Need
First, gather your tools. You will need:
- Screwdriver
- Pliers
- New pull cord
- Wrench
- Scissors
- Gloves
Make sure you have all these tools ready.
Credit: www.youtube.com
Step 1: Remove the Old Pull Cord
First, put on your gloves. Safety is important. Now, find the cover of the pull cord. It is usually on top of the lawn mower. Use the screwdriver to remove the screws. Keep the screws safe. You will need them later.
Once the cover is off, you will see the spool. The spool holds the pull cord. Carefully remove the old pull cord from the spool. You may need the pliers to help you. Be gentle. Do not damage the spool.
Step 2: Prepare the New Pull Cord
Take the new pull cord. Measure it. The new cord should be the same length as the old cord. If it is too long, cut it with the scissors. Now, tie a knot at one end of the cord. This knot will hold the cord in place.
Credit: www.familyhandyman.com
Step 3: Attach the New Pull Cord
Now, it’s time to attach the new pull cord. Insert the knotted end of the cord into the hole in the spool. Make sure the knot is secure. Wind the cord around the spool. Keep it tight. This will make it easier to pull.
Next, thread the other end of the cord through the hole in the cover. Pull the cord through the hole. Attach the pull handle to the end of the cord. Tie a knot to keep the handle in place.
Step 4: Reassemble the Lawn Mower
Now, it’s time to put everything back together. Place the cover back on the lawn mower. Use the screws you removed earlier. Tighten them with the screwdriver. Make sure the cover is secure.
Step 5: Test the Pull Cord
Finally, test the new pull cord. Pull the cord gently. It should move smoothly. If it does, you have done a great job. If it does not, check the spool and the cover. Make sure everything is in place.
Tips for Maintaining Your Lawn Mower Pull Cord
Here are some tips to keep your pull cord in good shape:
- Check the cord regularly for wear and tear.
- Do not pull the cord too hard. It can break.
- Keep the lawn mower clean. Dirt can damage the cord.
Frequently Asked Questions
How Do You Know If The Pull Cord Is Broken?
If the pull cord doesn’t retract or starts fraying, it’s broken.
What Tools Are Needed To Replace A Lawn Mower Pull Cord?
You need a screwdriver, pliers, and a new pull cord.
Can You Replace A Pull Cord Yourself?
Yes, with basic tools and following simple steps, you can do it yourself.
How Long Does It Take To Replace A Lawn Mower Pull Cord?
It usually takes about 30 minutes to replace.
What Safety Precautions Should You Take?
Disconnect the spark plug to avoid accidental starting while working.
Where Can You Buy A Replacement Pull Cord?
You can buy it at hardware stores or online retailers.
Conclusion
Replacing the lawn mower pull cord is easy. You just need the right tools and a little patience. Follow these steps, and your lawn mower will be as good as new. Happy mowing!
